Product Description
Dulux
Weathershield Clear Exterior Wall finish is a premium silicone based
product for surfaces like absorbent, stone, brick, clay tiles to deliver
the natural look over a longer time. It provides excellent water repellent and protection against all adverse weather conditions.
Application Description
Use
Roller or Brush or Spray. For surfaces with normal porosity apply one
liberal coat of Dulux Weathershield Clear by brushing evenly on the
prepared surface. Allow the surface to dry overnight. Ensure that no
small patches are being left out without the coating. Repeat brush
strokes with heavy brush to ensure that the entire area is covered
fully.
Health & safety
Hazard warnings
Flammable
material. Store container in an upright position, with lid tightly
closed, in a cool, dry place, away from ignition sources. In case of
fire, use foam, dry powder, CO2, never use water. Keep out of reach of
children and away from combustible material, food, drinks and animal
feed. Avoid contact with skin.
Remove splashes from skin with soap and water or recognised skin
cleanser. Harmful: may cause lung damage if swallowed. If swallowed, do
not induce vomiting, seek medical advice immediately and show the
container or label. Use only in well-ventilated areas. Repeated exposure
may cause skin dryness or cracking. Avoid release to the environment.
Refer to special instructions/Safety Data Sheet. Do not empty into
drains. Toxic to aquatic organisms, may cause long term adverse effects
in the aquatic envronrment. Contain spoilage using sand or earth. Safety
Data Sheet available for professional user on request. No Added Lead,
Mercury or Chromium compounds.
Tips & Advice
Preparing the Surfaces
Allow all new surfaces to dry out
completely. Remove all loose dirt, debris, powdery residue, oil, grease,
wax or any other contamination by thorough brushing and scraping, using
a stiff wire or fibre brush followed by water jetting if required.
Anything which prevents penetration should be removed. Fill up minor
cracks and defects with cement and sand mixture for larger holes and
cracks. Ensure that the surface is fully dry before application.