INDIGO Polymer Putty Gold Series

This is a specially designed product based on white cement, redispersable polymer and functional additives, to give a smooth finish to rough exterior plasters. It can be used on interior as well as exterior surfaces like cement plasters, asbestos sheets, concrete, and brickwork.

Advantages

• Easy to use

• Good adhesion and compressive strength

• Non-flammable

• No added lead, mercury or chromium compounds

Surface preparation & application

1. Clean surface of loose paint, dust and grease by sanding with emery paper. Wipe clean with a soft cloth.

2. For newly plastered surfaces, allow for 3 months curing before painting. Then sprinkle the surface with water.

3. Apply one coat of Indigo Polymer Putty with a putty blade after mixing with 30-35% water by weight. Allow to dry for 4-5 hours.

4. If required gently rub the surface with abrasive paper grit no 500 or higher, or use putty blade to gently remove loose particles.

5. Apply second coat of Indigo Polymer Putty and allow to dry for 10-12 hours. (The applied putty should be 1.5 mm thick or less.)