Mepcrete Mepcobond (AAC Bond Adhesive)
1. MEPCOBOND (AAC Bond Adhesive) is available in pack size of 40 kg with
shelf life of 12 months from the date of manufacture under proper storage.
2. MEPCOBOND is made from polymeric additives which helps in providing
mechanical bond between block to block
3. It is a ready to mix product thereby eliminating need for bulk storage of
Sand and Cement.
4. MEPCOBOND are able to withstand hammering and chiselling. Due to measured
application and thin bed the wall construction is accurate.
5. MEPCOBOND confirms with ASTM C 1660 – 09 and has a pot life of 90 minutes
Directions to Use
Always clean the surface before application to remove any loose particles or
laitance.
• Ensure that the surface is solid (hard and rigid) for the given application
and free from voids, holes, and cracks.
• Pre-wetting of blocks.
• Ensure surface is well saturated before application.
• Mix 3 parts of MEPCOBOND to 1 part water (by volume) and mix to smooth,
workable stiff paste.
• Always add the powder to water.
• Allow the mix to stand for 2-3 min for the paste to mature.
• Do not add water to the already mixed mortar to extend the pot life.
• Put well-mixed MEPCOBOND on the block with the help of trowel, spread mortar
uniformly on the unit for a 3mm bed thickness.
• Firmly place the block with slight shear to ensure proper transfer and
bonding.
• MEPCOBOND to be applied on the block and on column and beam for good bonding
at the joints.
