Renacon Wall Putty

    Renacon Wall Putty can be used on all types of Exterior cement plaster/Interior walls, asbestos sheets, concrete & AAC block etc.,

 FEATURES:

• It improves the tensile strength of the wall.
• Wall putty increases the lifespan of the wall paint.
• Provides smooth and uniform finish to rough plaster.
• Perfect bonding with the substrate.
• Good Workability & Good water resistance.
• Resists the growth of algae and fungi on the wall.
• Good inter-coat adhesion to emulsion paints.

APPLICATION METHODOLOGY:

·  A) Wall Putty Mixing

• Mix till it attains a consistent & uniform workable paste.
• Make a mix of the paste that can be used within 2-3 hours.

B) Method of Application

• Clean and pre-wet the wall/plaster surface before applying Wall Putty.
• Application of wall putty without filling cracks will lead to flaking.
• Apply the first coat starting from the bottom to upward direction with a putty blade.
• Maintain a maximum thickness of 1.5mm for 2 coats.
• Wait for a minimum of 3 hours.
• As the first coat dries up, clean the surface with a dry cloth.
• Apply the second coat from the top to a downward direction with a putty blade.
• Wait for 12 hours.
• Clean the surface with a fine emery paper before applying paint.
• Apply the paint once the surface becomes touch dry.
•  

TECHNICAL DATA:

• Drying time: Surface dry time 30 min
• Sheen levels: NS
• Flash point IS01/1987 Part 1, Sec 6: NA
• Stability of thinned paint: To be used within 45 minutes.