saint Gobain Roofing Shingles

CertainTeed Roofing shingles are Fiberglass reinforced, high grade, Mineral- stabilized asphalt based mats which are overlaid with high strength ceramic coated granules and underlayed with a mineral stabilizer cum fire-retardant.

General pattern is made up of two pieces of shingles which are laminated together to form a thicker product to enhance its aesthetics and dimensional appeal.

ADVANTAGES OF SHINGLES

• Aesthetic
• Waterproof
• Unbreakable
• Zero maintenance
• Algae resistance
• Warranty

APPLICATION PROCEDURES

APPLICATION PROCEDURE – FOR CONCRETE DECKS

• All concrete surfaces shall be overlaid with a minimum of 1” Cement screed
• Surface provided shall be duly rendered to a smooth finish and bone dry.
• A coat of bituminous primer will be applied and left till it touch- dry.
• All junctions (if any) of sloping roof with a vertical wall or valley gutter if any will be lined with one feet wide flashing membrane
• Starter course will be fixed at the bottom of sloping roof surface (Eave edge) before commencing the application of CERTAINTEED shingles.
• CERTAINTEED shingles will then be fastened using approved Corrosion resistant nails, at suitable distance as per manufacturer’s specifications.
• The front part of the shingle shall be stuck to the subsequent shingle using the self-adhesive tape provided at the bottom.
• Ridges will be fixed once the surface coverage is complete

APPLICATION PROCEDURE – ON STRUCTURES WITH FIBER CEMENT BOARD OR WOODEN DECKS

• The Fiber cement Board or wooden deck (Marine–Ply) should be minimum of 16 mm thick (Should not warp in presence of moisture).
• The gaps between Boards to be kept zero and flashed using self-adhesive membrane.
• All junctions if any of sloping roof with a vertical wall or valley gutter if any will be lined with one feet wide flashing membrane
• Starter course will be fixed at the bottom of sloping roof surface (Eave edge) before commencing the application of CERTAINTEED shingles.
• CERTAINTEED shingles will then be fastened using approved Corrosion resistant Screws / Nails
• The front part of the shingle shall be stuck to the subsequent shingle using the self-adhesive tape provided at the bottom.
• Ridges will be fixed once the surface coverage is complete.